Hewlett Packard / Agilent
E2614A

The Agilent E2614A is a 0.5 mm, 8-Signal Wedge Probe Adapter for thin quad flat pack (TQFP) or plastic quad flat pack (PQFP) surface mount ICs.

If you've ever tried to probe a surface mount component, you've probably experienced one or more of the following frustrating situations: accidentally shorting IC pins together; electrical and/or mechanical problems with soldering small wires onto leads; and/or holding multiple probes and trying to use your scope at the same time. The Agilent Wedge probe adapter provides a solution to these frustrations.

It is easy to insert and stays put - no need to solder small wires onto leads. The Wedge is mechanically non-invasive, so you won't damage the legs of the IC. It makes two contact points with each leg of the IC. This redundant physical connection increases the electrical reliability of the connection.

• Easy connection to surface mount ICs
  
• Safe, with no chance of shorting
  
• Mechanically non-invasive contact
  
• Operating voltage: less than 40 V (dc + peak ac)
  
• Operating current: 0.5 A maximum
  
• Capacitance between contacts: 2 pF (typical)
  
• Self-inductance: 15 nH (typical)
  
• Contact resistance: less than 0.1 ohms
  

Please find a corresponding data sheet here.
Please find an enlarged image here.